The Line & Light PnP Driver is the starting point for our Plug & Play LED strip system, designed to make installing LED strip lighting simple. It converts 240V mains power down to 24V DC and comes complete with a plug and 2m lead.

The driver has six plug-in output ports, so you can connect our quick connect leads straight in and run your LED strip. Need more outputs? Add a junction box to the system to expand it further. There’s also a port on the side of the driver for an activation sensor, such as a motion sensor, hands-free, touch or door sensor, so you can trigger your lights automatically.

Dimensions

Length: 180mm
Width: 60mm
Depth: 17mm

Specifications

Primary Input: 240V AC/DC
Secondary Output: 24V DC
Will run 1-100W of LED Constant Voltage product
We recommend using a Minimum load of 10% and a Maximum load of 80% of rated power
This driver is non-dimmable and should not be used on the same circuit as a dimmer. There is a dimmable touch sensor that can be used to dim the lights on the output of this driver.

Warranty: 5 Years