Designed to be wired into constant current circuits up to 350mA to protect all LEDs in that circuit
Detect a problem in less than 2 millionths of a second and switch to protect your LEDs
A Red LED on the device will indicate a problem has been detected

• Normal LED Operating Current: 350mA


• Over Current Trip Threshold: < 550mA


• Time To Trip During Fast Surge: < 0.5 micro seconds


• Typical Fault Energy Per 3V LED During Surge: < 10 micro Joules


• Power Dissipated During Normal Operation: < 0.45W

IP Rating: IP64

Width: 25mm
Length: 25mm
Height: 15mm